Only $40.00 away from free shipping
Only $495.00 away from free shipping

Create a Folkcraft account for free rewards! Click HERE


Folkcraft® Machine Heads, Open Gear, Bone-Colored Button, Four Pack

Item Number 2300732

Regular price $18.00

If your dulcimer is in need of new "Tuning Machines" you have come to the right place! This four-pack of dulcimer tuning pegs with bone-colored buttons is just what you are looking for. 

The diameter of each shaft is .236", so a 1/4" hole in your scroll head will be just the right size. On our bone-colored button tuning pegs, the gear ratio is 14:1. The shaft length is 1 and 1/32" (just over an inch), measured from the inside of the plate to the tip of the shaft.

There are two holes in the shaft. The first hole is approximately 1/2" from the inside of the plate. The second hole is approximately 7/8" from the inside of the plate.

Customer Reviews

Based on 83 reviews
95%
(79)
4%
(3)
1%
(1)
0%
(0)
0%
(0)
R
Raymond Call
Machine heads, Open gear, Bone-colored button,4 pack

The package of machine heads include the necessary tiny mounting screws as well as the decorative chrome colored grommets. The grommets measure at about 5/16 inch in diameter so I used a letter 'O' drill bit to make the mounting holes. Instead of pounding them into position I used a 'C' Clamp and pressed them into the holes. The pilot holes for the screws that hold the machine heads in place were drilled with a #50 drill making them easy to screw into place using a small Phillips head screwdriver - i was concerned about stripping the slot for the screwdriver if the pilot hole was too small. As I recall, the description for the set of four mentions that 2 right and 2 left machines are included and such was the case thus allowing all four to be turned in the same rotational direction to adjust string tension no matter which side of the peg head they are mounted on. Very nice and smooth to use. So far they hold the tension accurately from day to day.

B
Bill Hunicke
Replaced old tuners (Machine Heads) with this open gear four pack.

I replaced the old worn tuners with these new tuners and they worked just fine.

C
Customer
Dulcimer Parts

Great parts

B
Bill Hunicke
NewTuners(MachineHeads)for Dulcimer

I replaced the old worn tuners (Machine Heads) on my Mountain Dulcimer with the Folkcraft tuners. They work great.

R
Roger Tanis
Machine heads open gear

The machine heads were easy to install and worked perfectly. I should have installed them sooner. It was a perfect choise.